Alcatel One Touch 7040E Android 4.2.2 Factory Firmware

Alcatel Pop C7 Stock ROM

Hello guys, I just wanna share my newly uploaded Alcatel Pop C7 Stock ROM that can be used for fixing dead boot and boot loop Alcatel Pop C7.  The stock ROM included in this article is Kitkat 4.4.2 with MT6582 Android scatter file. In this article, we will focus on flashing the firmware through SP Flash tool. All you need is to download all the required files and follow the instruction carefully

Unbrick Alcatel Pop C7

I will list the needed files that are required for flashing the stock ROM. You just need to prepare and download them. Also, disable your Adblock extension if you have one, you won’t be able to download some files if you have Adblock enabled.

THINGS YOU NEED

Windows Desktop or laptop.
Disable your Adblock extension to view the link correctly.
USB Cable (make sure it’s properly working)
SP Flash tool v5.15
MT65xx Preloader USB driver

 
Alcatel Pop C7 Stock ROM password: thefirmwarehu

Other links

• Or from here DOWNLOAD THESE FILES" 
  Firmware Here -->Alcatel One Touch Pop C7 7040E Part 1
  Firmware Here -->Alcatel One Touch Pop C7 7040E Part 2
  Firmware Here -->Alcatel One Touch Pop C7 7040E Part 3
  Firmware Here -->Alcatel One Touch Pop C7 7040E Part 4   
  
  VCOM Driver -->VCOM Manual 

Flash Alcatel Pop C7 stock ROM

1. Create a folder in your desktop and place all the files that you have downloaded. Extract all the files either by using 7zip or Winrar. The password for stock ROM is already posted beside with the firmware link.
2. The first thing we are going to do is to install the USB driver.If you are using Windows 8 up to the latest, kindly disable the driver signature first then come back here. Connect your device into the computer. Browse the MT65xx Preloader Driver folder, choose your operating system version accordingly then install the DriverInstall.exe. Restart your computer if required.
3. Disconnect your phone from PC by removing the USB Cable and turn it off.
4. Open SP Flash tool folder, find flash_tool.exe and right click and run it as Administrator.
5. From the main screen of SP Flash tool, click scatter-loadingbutton and browse the MT6582_Android_scatter_emmc.txtinside the Alcatel Pop C7 folder that you’ve extracted earlier.
6. Prepare the USB Cable, plug the USB cable into the computer but do not plug the other end in your Android phone. From SP Flash tool, click “Download“ button. If download won’t work, change it to firmware upgrade.
7. Now while holding either volume up or down, you may now plug the other end of USB cable to your Android phone. Do not release the volume down until you see a red progress bar in SP flash tool.
8. Whenever you see a yellow progress bar you can now release the volume down and wait for the process to finish. A green check icon will appear once done.
9. In some case that you encountered BROM Error, don’t panic it only means that your Alcatel Pop C7 is not yet completely recognize, just wait for the driver installation to finish. Note you don’t need to install anything; it will automatically install since you already installed the required USB driver. Once the driver has completely installed. Remove your phone from the computer and repeat the process from Step 6. Make sure to plug it in the same USB port.
10. Wait for the process to finish. You will see a green check icon upon successful flash operation.

Watch the video below, for the guide on how to flash a firmware. It may be a different stock ROM but still the same process.

ou can now safely remove your phone to the computer. Turn on your Alcatel Pop C7, it may stuck on the boot logo for at least 20 minutes just wait until you see the setup wizard. I already tested this firmware and it’s totally working. Thank you for reading guys, if you find this blog helpful please subscribe and don’t forget to like us on our Facebook page just search “The Firmware Hub” to get the latest updates.

Share it before leaving