Download ZTE Blade A452 official firmware from the link here, and follow the provided flashing instructions to learn how to flash the stock rom.
If you own a ZTE Blade A452 smartphone and searching for the Stock Firmware then you are at the right place. Here i will guide you to install official stock ROM on ZTE Blade A452 smartphone. This guide is simple and easy to follow. We have listed the Official Stock ROM for ZTE Blade A452 below. Download the required file to either upgrade or downgrade your ZTE Blade A452.
We ask you to read the steps before doing something wrong. READ READ READ!! Once you are done! Now you can download the SP Flash Tool, VCOM Drivers and the stock ROM from the below Pre-Requisite note.
We ask you to read the steps before doing something wrong. READ READ READ!! Once you are done! Now you can download the SP Flash Tool, VCOM Drivers and the stock ROM from the below Pre-Requisite note.
Guide To Install Official Stock ROM On ZTE Blade A452
PREREQUISITE :
- Download the SP Flash Tool: Download and Extract it
- VCOM driver: Download – Instal the VCOM Driver on your computer (still compatible with MT67xx phones)
- Download firmware
- Charge your phone to at least 70%
- Back up your device just in case if you need it later
- You need either Laptop or PC
The Advantage Of Stock Firmware:
- Flash Stock To Unbrick your ZTE Blade A452
- Flash Stock ROM to Fix the Bootloop problem
- Upgrade and Downgrade ZTE Blade A452
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on ZTE Blade A452
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
READ THIS CAUTION:
So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on ZTE Blade A452 Only MT6735.
Enregistrer un commentaire