Samsung Galaxy J1 MINI PRIME all versions Stock firmwares

        Updated on April 30, 2018: Added the April 2018 Security Patch build to the list of Samsung Galaxy J1 Mini Prime Stock Firmware collections.
       Here we will list all the Stock Firmware Collection for Samsung Galaxy J1 Mini Prime smartphone.    You can flash the Stock Firmware on Samsung Galaxy J1 Mini Prime using the below Video tutorial on How to Install Samsung Galaxy J1 Mini Prime Stock firmware

HOW TO FLASH THESE STOCK ROMS 

List of Samsung Galaxy J1 Mini Prime Stock Firmware collection

Build Number	OS	Security Patch
J106FJVU0ARC4	6.0.1	April 2018
J106BDSS0ARC1	6.0.1	March 2018
J106BDXS0ARC1	6.0.1	March 2018
J106FJVU0ARC1	6.0.1	March 2018
J106FJVU0ARA1	6.0.1	January
J106FJVS0ARB1	6.0.1	January
J106MUBU0ARA2	6.0.1	January
J106BUBU0ARA1	6.0.1	January
J106HDDS0AQL2	6.0.1	December
J106HJVU0AQK1	6.0.1	August
J106FJVU0AQI3	6.0.1	August
J106HDDS0AQH1	6.0.1	August
J106BUBU0AQH1	6.0.1	August
J106BUBS0AQI1	6.0.1	August
J106MUBU0AQI1	6.0.1	August
J106HJVU0AQF4	6.0.1	June
J106BUBU0AQG1	6.0.1	July
J106MUBU0AQF2	6.0.1	June
J106FJVU0AQF2	6.0.1	June
J106BUBU0AQC2	6.0.1	April

CLICK TO DOWNLOAD THE FILES THAT REQUIRED :

• Download and Install the Samsung Kies Software: CLICK HERE
• Download and Install the Samsung USB Drivers: CLICK HERE
• Click to download and Extract the ODIN ZIP file on Desktop: CLICK HERE

PRE-REQUISITE :

• Remember: This guide is to install Samsung Galaxy J1 Mini Prime Stock Firmware.
• Your device must have 70% Of battery
• You need a Laptop or PC to perform this Action
• You should be using Stock Firmware and not Custom ROM
• Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t lose your data)
• You need to Enter Download Mode watch the video tutorial
• Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your Phone.

Steps to Install Samsung Galaxy J1 Mini Prime Stock Firmware:

1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
   • First of all, enable the USB Debugging
   • To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
   • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator 
3. Now Reboot your Phone into Download Mode
4. So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
5. Now Connect your Phone to PC using the USB Cables
6. When you connect the USB cable you will see a blue sign in Odin
7. Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
8. Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
9. Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.

Note: You should not remove or operate on your device until the flashing process is shown to be completed.

Once the flashing process is completed and if everything has gone as planned, you should be able to see a big green box saying "RESET" or "PASSED." This will depend on the version of Odin downloader you have downloaded. By now, the device has finished rebooting and it is safe to remove or unplug the phone/device.

That’s ALL! When you restart your Phone you will have the new stock firmware installed on Galaxy J 1 mini PRIME.